Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #3: Sun Apr  7 14:23:44 EDT 2002
    vangyzen@trillian.vangyzen.net:/usr/build/stable/sys/compile/AMELIA
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (730.98-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134094848 (130952K bytes)
avail memory = 127406080 (124420K bytes)
Preloaded elf kernel "kernel" at 0xc0310000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fbb90
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pci0: <UHCI USB controller> at 29.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2
xl0: Ethernet address: 00:06:5b:d9:b8:a4
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcic0: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> irq 11 at device 1.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pcic2: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 3.0 on pci2
pcic2: PCI Memory allocated: 0x44002000
pcic2: TI12XX PCI Config Reg: [pwr save][pci only]
pccard2: <PC Card bus (classic)> on pcic2
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
ad0: 19077MB <FUJITSU MHR2020AT> [38760/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 2
pccard: card removed, slot 2
pccard: card inserted, slot 2
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 11 slot 2 on pccard2
wi0: 802.11 address: 00:02:2d:5b:82:9b
wi0: using Lucent chip or unknown chip